CGHKV - 6345 MAGNOBOND EPOXY RESINS
- MSDS: CGHKV
- Manufacturer: MAGNOLIA PLASTICS INC
- Product Name: 6345 MAGNOBOND EPOXY RESINS
- National Stock Number: 8040-00F054589
Product Identification
Product ID:6345 MAGNOBOND EPOXY RESINS
MSDS Date:08/05/1997
FSC:8040
NIIN:00F054589
Kit Part:Y
MSDS Number: CGHKV
Responsible Party
CHAMBLEE, GA 30341-2234
US
Emergency Phone: 800-457-4280/770-451-2777
Info Phone: 770-451-2777/800-457-4280
Cage: 22121
Contractor
Telephone: (770) 451-2777/(800) 457-4280
Cage: 22121
Ingredients
EPOXY RESIN
Fraction By Weight: 75-85%
1-CHLORO-2,3-EPOXYPROPANE, EPICHLOROHYDRIN (SUSP ANIMAL
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: <3%
OSHA PEL 5 PPM (SKIN)
ACGIH TLV: 2 PPM (SKIN)
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
TITANIUM DIOXIDE, TITANIUM OXIDE (SUSPECTED ANIMAL
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: <50%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: MODERATELY IRRITATING.
POSSIBLE SKIN SENSITIZER. INGESTION: LOW TOXICITY.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & EYE DISORDERS.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS.
INHALATION: REMOVE TO FRESH AIR. GIVE OXGYEN IF NECESSARY.
INGESTION: DON'T INDUCE VOMITING. GIVE LARGE DOSES OF WATER. OBTAIN
MEDICAL ATTEN TION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:AVOID BREATHING SMOKE. IN CONFINED AREA: USE
NIOSH APPROVED SCBA. COOL FIRE EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:AVOID CONTACT W/LIQUIDS & VAPORS. WIPE W/A
CLOTH/COLLECT ANY ABSORBENT MATERIAL. LARGE: DIKE & CONTAIN.
PUMP/SHOVEL INTO SALVAGE VESSELS.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN TIGHTLY
CLOSED CONTAINERS. USE W/ADEQUATE VENTILATION. FOR INDUSTRIAL USE
ONLY.
Other Precautions:AVOID CONTACT W/SKIN & EYES. MAY CAUSE SEVERE EYE
BURNS. CORROSIVE.
Exposure Controls
Respiratory Protection:FOR EXCESSIVE VAPORS/TO MAINTAIN BELOW TLV
LIMIT, NIOSH APPROVED RESPIRATOR IN COMPLIANCE TO 29-CFR 1910.134.
Ventilation:LOCAL EXHAUST/MECHANICAL EXHAUST
Protective Gloves:IMPERVIOUS RUBBER
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS TO MINIMIZE
PERSONAL CONTACT. EYE WASH STATION, SAFETY SHOWER.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHNG BEFORE
REUSE. USE GOOD HYGIENE PRACTICES.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>225F
Vapor Pres:0
Vapor Density:>1
Spec Gravity:0.6
Evaporation Rate & Reference:(BUAC=1): <1
Solubility in Water:<0.1
Appearance and Odor:PINK PASTE
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS & BASES
Stability Condition to Avoid:ELEVATED TEMPS.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN
Conditions to Avoid Polymerization:LARGE MIXTURES IN BULK. CURING
PROCESS IS EXOTHERMIC.
Disposal
Waste Disposal Methods:CURE, THEN BURY/INCINERATE. REMOVE SALVAGE
VESSELS TO A WASTE DISPOSAL SITE IAW/LOCAL, STATE & FEDERAL
REGULATIONS. CORROSIVE LIQUID UN3267.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.